Integrasi Statistical Quality Control dan Failure Mode and Effect Analysis Dalam Menganalisis Defect Pada Proses Produksi

Sri Kaidah, Tosty Maylangi Sitorus, Hartami Dewi

Abstract

One of the companies that make tools for printing at one of the printing companies in Jakarta has a product in the form of Offset Roller Printing, where Offset Roller Printing is a mainstay product with the highest sales. The company promises a declining trend in the rejection rate in 2024, with the rejection rate not exceeding 2%. For that, an analysis of the cause of the problem will be carried out until a repair proposal is obtained by using an integrated method which is Statistical Quality Control (SQC) with Failure Mode Effect Analysis (FMEA). Based on the check sheet, it shows the total production in January - December 2023 of 5699. On the overall operational map, there is no point that is outside the upper or lower operational limits. From the results of the FMEA analysis, it can be seen that the highest RPN is the cover for the method factor with the first priority having an RPN value of 252 which means that the vulcanization temperature is not reached or the temperature of the maturity point is not reached. unable to. There is a need to renew the vulcanization recipe so that the rubber matures perfectly and avoids the occurrence of oblong or closed defects. In addition, improvement proposals as a form of evaluation results are given related to the operator's attention factor, operator's skill, various types of materials, working environment temperature, no machine control, comfortable work environment, hostap plastic setting.

Keywords

Defect, Failure Mode and Effect Analysis, Statistical Quality Control

Full Text:

PDF

References

M. Smętkowska and B. Mrugalska, “Using Six Sigma DMAIC to Improve the Quality of the Production Process: A Case Study,” Procedia - Soc. Behav. Sci., vol. 238, pp. 590–596, 2018, doi: 10.1016/j.sbspro.2018.04.039.

K. Matzler, E. Sauerwein, and K. A. Heischmidt, “Importance-performance analysis revisited: The role of the factor structure of customer satisfaction,” Serv. Ind. J., vol. 23, no. 2, pp. 112–129, 2003, doi: 10.1080/02642060412331300912.

B. H. Imanuel and S. Tanoto, “Pengaruh Kualitas Layanan Terhadap Kepuasan Pelanggan Di PT Hastaco Tour and Travel,” Agora, vol. 7, no. 1, pp. 1–8, 2019.

R. Puspitasari, “ANALISIS KUALITAS PELAYANAN CIKARANG DRY PORT DENGAN METODE IMPORTANCE - PERFORMANCE ANALYSIS DAN KANO ANALYSIS OF CIKARANG DRYPORT SERVICE QUALITY USING IMPORTANCE - Reni Puspitasari Puslitbang Perhubungan Darat dan Perkeretaapian Jl . Medan Mereka Timur,” J. Penelit. Transp. Multimoda, vol. 13, no. November 2014, pp. 121–134, 2015.

M. A. O’Neill and A. Palmer, “Importance-performance analysis: A useful tool for directing continuous quality improvement in higher education,” Qual. Assur. Educ., vol. 12, no. 1, pp. 39–52, 2004, doi: 10.1108/09684880410517423.

J. Abalo, J. Varela, and V. Manzano, “Importance values for Importance-Performance Analysis: A formula for spreading out values derived from preference rankings,” J. Bus. Res., vol. 60, no. 2, pp. 115–121, 2007, doi: 10.1016/j.jbusres.2006.10.009.

P. Mudie and A. Cottam, “Chapter 5 - Service quality,” Manag. Mark. Serv. (Second Ed., pp. 81–108, 1999, [Online]. Available: http://www.sciencedirect.com/science/article/pii/B9780750635943500098

R. Sukwadi, P. P. Josua, and H. Tannady, “Penerapan Model Integrasi Fuzzy Servqual-Ipa-Qfd Dalam Analisis Kualitas Layanan Stasiun Gambir,” J. Muara Sains, Teknol. Kedokt. dan Ilmu Kesehat., vol. 5, no. 1, p. 181, 2021, doi: 10.24912/jmstkik.v5i1.9628.

U. Cahyadi and I. A. Maulana, “Usulan Peningkatan Kualitas Layanan di Hotel X Menggunakan Metode Servqual dan IPA,” J. Kalibr., vol. 18, no. 2, pp. 37–41, 2021, doi: 10.33364/kalibrasi/v.18-2.729.

A. O. Akbar Nagara and A. Emaputra, “Analisis Kepuasan Konsumen terhadap Pelayanan Barbershop dengan Metode Service Quality (Servqual) dan Importance Performance Analysis (IPA) Studi Kasus XYZ Barbershop,” J. Rekayasa Ind., vol. 2, no. 2, pp. 97–104, 2020, doi: 10.37631/jri.v2i2.183.

S. Ardyani Nalendri, I. Aknuranda, and F. Pradana, “Pengembangan Sistem Survei Kepuasan Pengunjung pada UPT P2BJ Jawa Timur dengan Metode SERVQUAL dan Analisis Importance & Performance Matrix | Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 11, pp. 5173–5181, 2018, [Online]. Available: http://j-ptiik.ub.ac.id/index.php/j-ptiik/article/view/3226

L. R. Noer, U. Ciptomulyono, and I. Sudarso, “Analisis Peningkatan Kualitas Pelayanan Pelanggan Pt . Pos Indonesia Persero Kantor Wilayah Surabaya Selatan Dengan Metode Servqual , Metode Model Kano , Dan Quality Function Deployment ( Qfd ),” Pros. Semin. Nas. Manaj. Teknol. XXI, vol. 9161, pp. 1–9, 2014.

B. Phadermrod, R. M. Crowder, and G. B. Wills, “Importance-Performance Analysis based SWOT analysis,” Int. J. Inf. Manage., vol. 44, pp. 194–203, 2019, doi: 10.1016/j.ijinfomgt.2016.03.009.

I. Sever, “Importance-performance analysis: A valid management tool?,” Tour. Manag., vol. 48, pp. 43–53, 2015, doi: 10.1016/j.tourman.2014.10.022.

I. Setiyanto, D. Wijayanto, B. A. Wibowo, and D. A. N. N. Dewi, “Important-performance analysis of marine tourism development in Karimunjawa Island,” AACL Bioflux, vol. 16, no. 6, pp. 2912–2922, 2023.

S. Y. Yin, K. K. Huang, J. I. Shieh, Y. H. Liu, and H. H. Wu, “Telehealth services evaluation: a combination of SERVQUAL model and importance-performance analysis,” Qual. Quant., vol. 50, no. 2, pp. 751–766, 2016, doi: 10.1007/s11135-015-0174-4.

R. T. Y. Yanto and K. S. Kurniandono, “Analisis Kualitas Pelayanan Pengiriman Paket dan Dokumen pada Pt . Satria Antaran Prima ( SAP Express ) Jakarta Timur Menggunakan Metode Importance Performance Analysis ( IPA ),” J. Bisnis dan Pemasar., vol. 9, no. 1, pp. 1–12, 2019.

R. Murgani and S. Hasibuan, “Peningkatan Kualitas Layanan Penyedia Layanan Logistik Berdasarkan Integrasi SERVQUAL dan QFD,” J. Rekayasa Sist. Ind., vol. 11, no. 2, pp. 229–242, 2022, doi: 10.26593/jrsi.v11i2.5253.229-242.

S. Quality, “DENGAN METODE SERVICE QUALITY ( ERVQUAL ) FUZZY DI PT . POS INDONESIA SIDOARJO Oleh Muchamad Mustofa ; Handoyo dan Dira Ernawati Prodi Teknik Industri , FTI-UPN ” Veteran ” Jatim”.

A. Reza Nugraha, M.Dzikron, and Iyan Bachtiar, “Usulan Perbaikan Kualitas Pelayanan Jasa Menggunakan Metode Service Quality (Servqual) dan Model Importance Performance Analysis (IPA),” J. Ris. Tek. Ind., pp. 9–16, 2023, doi: 10.29313/jrti.v3i1.1830.

H. Winarno and T. Absror (Universitas Serang Raya), “Analisis Kualitas Pelayanan Dengan Metode Service Quality (Servqual) Dan Importance Performance Analysis (Ipa) Pada Pt. Media Purna Engineering,” J. Manaj. Ind. Dan Logistik, vol. 1, no. 2, p. 162, 2017, doi: 10.30988/jmil.v1i2.38.

H. Armaniah, A. S. Marthanti, and F. Yusuf, “Pengaruh Kualitas Pelayanan Terhadap Kepuasan Konsumen Pada Bengkel Generasi Knalpot,” J. Prospek Pendidik. Ilmu Sos. dan Ekon., vol. 4, no. 1, pp. 11–23, 2022, doi: 10.30872/prospek.v4i1.1321.

C. Candrianto, R. Sardani, R. F. Lubis, and M. Zakaria, “Analisis Penyebab Kegagalan Mesin Wrapping Menggunakan Failure Mode And Effect Analysis di PT. X,” Invent. Ind. Vocat. E-Journal Agroindustry, vol. 2, no. 1, p. 33, 2021, doi: 10.52759/inventory.v2i1.58.

J. Marbun, “Analisis Kepuasan Pelanggan 3rd Party Terhadap Kualitas Jasa Logistik PT Cipta Krida Bahari ( CKB Logistik) Dengan Menggunakan Metode Servqual dan Importance Performance Analysis ( IPA ),” vol. 1, no. 1, pp. 274–291, 2020, [Online]. Available: https://repository.unugha.ac.id/503/1/Analisis Kepuasan Pelanggan 3rd Party Terhadap Kualitas Jasa Logistik PT Cipta Krida Bahari %28 CKB Logistik%29 Dengan Menggunakan Metode Servqual dan Importance Performance Analysis %28 IPA %29.pdf

I. Russo, B. Gaudenzi, I. Confen, and A. Borghesi, “Logistics Service Quality : Searching for New Drivers of 3PL Customers ’ Satisfaction,” pp. 383–387, doi: 10.1007/978-3-662-43871-8.

R. Sardani, D. Faradila, S. O. Viarani M, and E. Supriadi, “Pengendalian Kualitas Proses Pengemasan Gula Karung Menggunakan Metode Statistical Process Control (SPC),” Invent. Ind. Vocat. E-Journal Agroindustry, vol. 1, no. 1, p. 16, 2020, doi: 10.52759/inventory.v1i1.19.

S. N.M, C. F. N, B. R, and S. A.P, “A fuzzy SERVQUAL based method for evaluated of service quality in the hotel industry,” Procedia CIRP, vol. 30, pp. 433–438, 2015, doi: 10.1016/j.procir.2015.02.140.

D. Hajar, D. Satria, and P. Arifin, “Analisis Pengambilan Keputusan Pemilihan Perusahaan Penyedia 3PL Di Pekanbaru,” J. Komput. Terap., vol. 1, no. 2, pp. 19–28, 2015, [Online]. Available: http://jurnal.pcr.ac.id

B. W. D. Nugroho, N. J. K. Jakti, M. A. N. Rochman, and A. J. Nugroho, “Analisis Pengendalian Kualitas Produk Gula Dan Biaya Kualitas Dalam Menunjang Efektivitas Produksi (Studi Kasus: PT Madu Baru Pg Madukismo),” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 2, pp. 72–81, 2023.

A. Y. Kha’irunisa, M. T. Rohayati, I. N. Kusmayanti, and S. S. Mpd, “Perancangan Kebutuhan Pelanggan Terhadap Layanan Penyewaan Gudang Berbasis Website Inaventory Menggunakan Pendekatan Integrasi Electronic Service Quality Dan Model Refined Kano,” eProceedings Eng., vol. 6, no. 2, pp. 6813–6823, 2019, [Online]. Available: https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/10982

Y. Penilasari and J. Nugraha, “Penggunaan Servqual dalam Kualitas Pelayanan Bidang Administrasi di Kecamatan Gayungan Surabaya,” J. Pendidik. Ekon., vol. 15, no. 2, pp. 207–220, 2021, doi: 10.19184/jpe.v15i2.24624.

Sinollah and Masruro, “Dalam Membentuk Kepuasan Pelanggan Sehingga Tercipta Loyalitas Pelanggan ( Studi Kasus pada Toko Mayang Collection cabang Kepanjen ),” J. Dialekt., vol. 4, no. 1, pp. 45–64, 2019.

M. Jazuli, D. Samanhudi, and Handoyo, “Analisis kualitas pelayanan dengan SERVQUAL dan importance performance analysis di PT. XYZ,” Juminten J. Manaj. Ind. dan Teknol., vol. 1, no. 1, pp. 67–75, 2020, [Online]. Available: url: http://juminten.upnjatim.ac.id/index.php/juminten

D. T. Rawung, “Metode penarikan sampel,” Pus. Pendidik. dan Pelatih. Badan Pus. Stat. RI, p. 22, 2020, [Online]. Available: https://pusdiklat.bps.go.id/diklat/bahan_diklat/BA_2144.pdf

I. Sukoco and A. R. Fadillah, “The Analysis of Talent Management Strategy Using Organizational Competency Approach in Pt Pindad (Persero) Bandung City,” AdBispreneur, vol. 1, no. 1, 2016, doi: 10.24198/adbispreneur.v1i1.9101.

M. T. Y. Suari, N. L. W. S. Telagawathi, and N. N. Yulianthini, “Pengaruh Kualitas Produk dan Promosi Produk Terhadap Keputusan Pembelian,” Bisma J. Manaj., vol. 5, no. 21, pp. 26–33, 2023, doi: 10.24929/abhakte.v1i2.3053.

DOI: http://dx.doi.org/10.52759/inventory.v5i1.188

Refbacks

  • There are currently no refbacks.